Coffee Printer – Six Capabilities to Think About When Selecting a Coffee Printer.

Do you need to include a photo to your quilt that looked more like part of the fabric than an iron-on decal?

In the past, we relied on photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new way to get your preferred photo from your scrapbook and onto your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. With a price of about $20,000, it’s not practical to work out and purchase your personal DTG printer. The common price for coffee printer is $8 to $10.

This procedure is a little more pricey than the traditional photo transfer method. That’s partially as the technology is very new. Should you do choose to consider using a DTG photo on your own memory quilt block, there are some things to look for in selecting the printer that will perform the be right for you:

1. Make certain you can find no chemicals needed to pre-treat your fabric first. Some DTG printers create an image that is certainly a lot more like screen printing. You don’t want that seem to be or feel in your quilt. The ink will probably be hard along with the fabric and may eventually (sometimes much earlier than later) will begin to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. If you can notice the ink is raised over the surface by any means at all, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing available from the Brother GT 541. You will find no chemicals required to pre-treat the material. The inks bond with all the natural fibers and so are heat cured setting the image. The inks are water based, which will help leave a soft yet crisp image on your fabric.

There are a few downfalls to using uv printer on your own quilt blocks. One pitfall is color limitations. Since DTG printing is a form an electronic printing, there is not any white ink. White is the lack of color. This means that you can not print a photo on navy blue or black fabric.

Digital garment or fabric printing is actually a CMYK format – cyan, magenta, yellow, and black. You can mix those colors to acquire a full spectrum of accurate colors – just not white. You will find DTG printers that print white ink, but many of the require chemical pre-therapy for the fabric and may give you that thick surface print.

You must use a light colored or neutral fabric and it needs to be cotton or a cotton blend. The material must be capable of withstand 350 degrees for approximately half a minute. If you are not 09dexypky with one hundred percent cotton or even a 50/50 blend, ask your printer in the event the fabric work.

Measurements of your print can be a limitation. Most DTG printers possess a printing field up to 14 inches x 16 inches. For the majority of quilters, that size range won’t become a problem.

And speaking of printing fields, here’s a hint. Most direct to t-shirt printer charge for the 14×16 surface. In case your blocks enables 2 or 3 photos to fit within that range, you can get all of them printed for the price tag on one. Talk with the printer to ascertain if it’s possible along with your particular project.

Like most technological advances, the price tag on digital garment (or fabric) printing probably will decrease after a while. Maybe it would be seen on smaller printers for home and private use. For the time being, try to find a DTG printer for your next photo quilt project. The final results may be like custom fabric, which will be an excellent touch for the one of a kind quilt!